FOUR AND TWO STROKE ENGINE

Engines based on the four-stroke cycle or Otto cycle have one power stroke for every four strokes (up-down-up-down) and are used in cars, larger boats and many light aircraft. They are generally quieter, more efficient and larger than their two-stroke counterparts. There are a number of variations of these cycles, most notably the Atkinson and Miller cycles. Most truck and automotive diesel engines use a four-stroke cycle, but with a compression heating ignition system. This variation is called the diesel cycle.

Engines based on the two-stroke cycle use two strokes (one up, one down) for every power stroke. Since there are no dedicated intake or exhaust strokes, alternative methods must be used to scavenge the cylinders. The most common method in spark-ignition two-strokes is to use the downward motion of the piston to pressurize fresh charge in the crankcase, which is then blown through the cylinder through ports in the cylinder walls.
Spark-ignition two-strokes are small and light (for their power output), and mechanically very simple; they are also generally less efficient and more polluting than their four-stroke counterparts. However in single cylinder small motor applications cc for cc, a two-stroke engine produces much more power than equivalent 4 strokes due to the enormous advantage of having 1 power stroke for every 360 degrees of crankshaft rotation (compared to 720 degrees in a 4 stroke motor).
Two-stroke engines have been less fuel-efficient than other types of engines because unspent fuel being sprayed into the combustion chamber can sometimes escape out of the exhaust duct with the previously spent fuel. Without special exhaust processing, this can produce high pollution levels. Whilst two-stroke motors remain popular in Europe and Asia, they are penalised in some American markets such as California for this reason.
Research continues into improving many aspects of two-stroke motors, including direct fuel injection amongst other things. Initial results have produced motors that are much cleaner burning than their traditional counterparts.
Two-stroke engines are widely used in snowmobiles, lawnmowers, weed-whackers, chain saws, jet skis, mopeds, outboard motors and many motorcycles.
The largest compression-ignition engines are two-strokes, and are used in some locomotives and large ships. These engines use forced induction to scavenge the cylinders. An example of this type of motor is the Wartsila-Sulzer turbocharged 2 stroke diesel as used in large container ships. It is the most efficient and powerful engine in the world, with over 50% thermal efficiency for comparison the most efficient small 4 stroke motors are around 43.0% thermal efficiency (SAE 900648), and size is an advantage for efficiency due to the increase in the ratio of volume to area.